Plumbers Sarasota install, repair, and maintain the pipes that deliver water, gas, and sewage to and from homes and businesses. They also connect appliances like dishwashers and washing machines to these systems.


This career requires strong communication skills to listen to customer concerns and recommend appropriate fixes. It also demands physical stamina for working in tight spaces and with tools that can be heavy or hazardous.

A dripping faucet wastes water and adds to your utility bills. It also creates a humid environment where mildew and mold thrive. A plumber can fix a leaking faucet, but if the damage is extensive or the faucet is old, it may be time to replace it.

If your leaking faucet is caused by a worn cartridge or washer, it’s an easy fix. You can buy replacement parts from a plumbing supply specialist, or you can follow these steps:

Turn off the water supply valves under the sink to stop the flow of water. Remove the faucet handle either with an Allen wrench or a screwdriver. Some older faucets have a decorative cap that covers the screw, in which case you need to pry it off with a utility knife. Once the handle and screw are removed, you can unscrew the dome assembly under the handle with a screwdriver. Once the screw is out, remove the ceramic disc (on some faucets) and replace it with a new one. Then, replace the rubber O-ring on the stem with a new one of the same size, and lubricate it with petroleum jelly or plumber’s grease.

If the leaking is caused by a corroded valve seat, it’s more complicated. The sediment and minerals that build up in the valve seat erode it over time, causing a leaky faucet. You can try to clean it with a rag and some vinegar, but you’ll probably need to replace the valve seat.

If your leaking faucet is caused by corroded pipes or old piping, it’s probably best to replace the entire unit. Plumbers can install new piping or pipes and fixtures, and they can also repair or replace existing ones. They’ll be able to assess the condition of your current plumbing system and recommend the best course of action. In addition, they can help with other home improvement projects, such as installing dishwashers and toilets. Plumbing professionals also collaborate with other construction teams and architects to ensure that plumbing systems are properly integrated into building projects. They also provide customer service, communicating with clients to understand their needs and concerns.

Faucet Replacement

If your faucet is old or has significant problems, replacing it may be a more effective and cost-efficient solution than trying to repair it. A professional plumber will be able to help you choose the right faucet for your space and install it quickly and efficiently. They will also make sure the new faucet fits your sink and the existing water lines, and that it is properly aligned and leveled.

One of the most common reasons to replace a faucet is if it has a constant leak. A leaking faucet wastes water and can lead to higher utility bills and water damage. Skilled plumbers can find the source of the leak and fix it before it gets worse.

Another sign that it’s time to replace a faucet is if you have low water pressure. This could be caused by a clogged aerator or water supply issues, but it could also be an indication that the faucet is deteriorating and needs to be replaced.

To prevent water from flooding the area when removing an old faucet, shut off the water supply before starting. Look under the sink for a pair of shut-off valves, typically small handles that when turned clockwise will stop the flow of water. It’s also a good idea to turn on the faucet to drain any remaining water in the pipes and sink.

Once the old faucet is removed, clean the sink surface to ensure a tight seal with the new one. It’s important to follow the manufacturer’s instructions for installation, including any specific tools that might be needed. Once the new faucet is in place, connect the water lines and test it for any leaks.

Replacing a bathtub or shower faucet can be more challenging than replacing a kitchen or bathroom faucet, but it’s still a doable DIY project with the right knowledge and tools. It’s also a great way to improve the aesthetic of your home and add value if you plan on selling it in the future. When installing a new tub or shower faucet, it’s a good idea to add an access panel so you can easily make repairs in the future without having to tear into the wall.

Faucet Installation

Faucets are one of the most commonly used plumbing fixtures in your home, so they’re subject to a lot of wear and tear. Eventually, you may need to replace your faucet because of damage or simply due to age. Replacing an old faucet can help improve your home’s aesthetic and increase its value. It can also save you money on your water bill by preventing leaks that can waste water and lead to costly repairs.

Before you can install a new faucet, you need to remove the old one. Start by shutting off the water supply valves underneath your sink. Then, take off the retaining nuts inside your cabinet that hold the faucet in place. Next, remove the spout and handle, then clean off any grime below the sink. After that, feed the new faucet’s supply tubes through its hole and tighten the nut underneath. Then, connect the new faucet’s flexible water supply lines to the hot and cold water valves using a wrench.

If you have a leaking faucet, there are a few things that can cause it. Some of these issues can be repaired with a little DIY effort, but other problems will require the help of a plumber.

Leaking is a common problem with faucets, and it can be a big one. Even a small leak can cause significant damage to your sink and your home’s plumbing system. Leaks can also lead to mold growth, so it’s important to catch them early and fix them.

Repair or Replace a Cracked Faucet

A cracked faucet is often an easy repair, but it can be difficult to know whether you should try to fix it yourself or call in a plumber. A cracked faucet can be a sign of serious problems in your plumbing, so you should always have it checked by a professional plumber.

If you’re unsure whether your cracked faucet is fixable, check the manufacturer’s website for troubleshooting guides and instructions. You can also ask a plumber at your local hardware store for advice. To make the job easier, prepare by getting a bucket or pan to catch the water that drips from the sink and some old towels to absorb any spills. Also, get a basin wrench if you don’t have one to help you reach the nut underneath the sink.

Faucet Maintenance

Faucets need to be regularly cleaned and inspected for any signs of damage. This can help avoid costly repairs down the road, as well as protect your home from potential water or structural damage. It’s important to know the warning signs of a damaged faucet so you can call your plumber immediately.

Leaking: A leaking faucet can waste thousands of gallons of water per year, which adds up to hefty energy bills and potential water damage. Not to mention, the continuous dripping can also lead to rust and other damaging conditions.

A leaking faucet should be fixed as soon as possible, as it can cause severe issues for your plumbing system over time. Our plumbing contractors can quickly repair or replace your leaking faucet, saving you money and preventing further damage to your plumbing system and home.

Dripping: One drip a second may seem harmless, but it can actually cost you a lot of money and cause additional problems in your home. Dripping faucets waste a surprising amount of water each month, and can cause other issues such as rust and mineral deposits. Leaving a dripping faucet in your bathroom can also affect the water pressure throughout your entire house.

Squeaky: A squeaky faucet is usually caused by a worn out washer or O-ring, which can be replaced by a plumbing contractor. However, if the internal parts are too worn out to be repaired, it may be time to replace your faucet.

Hard Water Buildup: Faucet aerators can become clogged with mineral deposits and debris, which can affect fluid flow and cause unwanted splashing or spraying. A quick cleaning with a solution of equal parts vinegar and water should take care of this problem, as well as any other built up grime.

Once a week, you should advise your client to give their faucets a quick inspection and wipedown. If they notice any mineral buildup, a solution of equal parts vinegar and water can be applied to a cloth and then gently rubbed over the affected area. After a few minutes, rinse thoroughly and towel dry. This can help your faucets look and work like new, and reduce the risk of damage from harder water deposits and stains.